Gqwill69: Created page with " #pwmconfig

 # Configuration file generated by pwmconfig, changes will be lost INTERVAL=10 DEVPATH=hwmon1=devices/platform/it87.3712 DEVNAME=hwmon1=it8721 FCTEMPS=hwmon1/de..."

2011-11-08T15:02:32Z

Created page with " #pwmconfig <pre> # Configuration file generated by pwmconfig, changes will be lost INTERVAL=10 DEVPATH=hwmon1=devices/platform/it87.3712 DEVNAME=hwmon1=it8721 FCTEMPS=hwmon1/de..."

New page

#pwmconfig

<pre>
# Configuration file generated by pwmconfig, changes will be lost
INTERVAL=10
DEVPATH=hwmon1=devices/platform/it87.3712
DEVNAME=hwmon1=it8721
FCTEMPS=hwmon1/device/pwm1=hwmon1/device/temp1_input hwmon1/device/pwm3=hwmon1/device/temp1_input
FCFANS=hwmon1/device/pwm1=hwmon1/device/fan1_input hwmon1/device/pwm3=hwmon1/device/fan1_input
MINTEMP=hwmon1/device/pwm1=20 hwmon1/device/pwm3=20
MAXTEMP=hwmon1/device/pwm1=60 hwmon1/device/pwm3=60
MINSTART=hwmon1/device/pwm1=150 hwmon1/device/pwm3=150
MINSTOP=hwmon1/device/pwm1=100 hwmon1/device/pwm3=0
</pre>

<pre>
root@areus:/etc# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +37.0Â°C (crit = +127.0Â°C)

it8721-isa-0e80
Adapter: ISA adapter
in0: +0.91 V (min = +0.28 V, max = +1.38 V)
in1: +1.61 V (min = +0.28 V, max = +2.66 V)
in2: +2.82 V (min = +0.28 V, max = +3.06 V)
Int Voltage: +2.81 V (min = +0.05 V, max = +2.75 V) ALARM
DRAM Voltage: +1.22 V (min = +0.28 V, max = +1.68 V)
CPU Core: +1.24 V (min = +0.00 V, max = +2.10 V)
in6: +1.21 V (min = +0.28 V, max = +3.06 V)
3VSB: +3.31 V (min = +0.96 V, max = +4.90 V)
Vbat: +3.43 V
CPU Fan: 340 RPM (min = 0 RPM)
Sys Fan: 2136 RPM (min = 0 RPM)
Case Fan: 2177 RPM (min = 0 RPM)
CPU Temp: +37.0Â°C (low = +0.0Â°C, high = +127.0Â°C) sensor = thermal diode
M/B Temp: +37.0Â°C (low = +6.0Â°C, high = +43.0Â°C) sensor = thermal diode

k10temp-pci-00c3
Adapter: PCI adapter
temp1: +33.2Â°C (high = +70.0Â°C)
</pre>

sensors3.conf
<pre>
chip "it87-*" "it8712-*" "it8716-*" "it8718-*" "it8720-*" "it8728-*"

label in8 "Vbat"

label temp1 "CPU Temp"
label temp2 "M/B Temp"
label temp3 "Aux Temp"

chip "it8721-*"

label in3 "Int Voltage"
label in4 "DRAM Voltage"
label in5 "CPU Core"

label fan1 "CPU Fan"
label fan2 "Sys Fan"
label fan3 "Case Fan"

label temp1 "CPU Temp"
#ignore temp2
label temp3 "M/B Temp"

set fan1_min 0
set fan2_min 0
set fan3_min 0

set temp1_min 0

set in0_min 0.3 * 0.90
set in1_min 0.3 * 0.90
set in2_min 0.3 * 0.90
set in2_max 10.0 * 1.0
set in4_min 0.3 * 0.90
set in6_min 0.3 * 0.90
set in6_max 10.0 * 1.0
</pre>

[[Category:Linux]]

Fancontrol - Revision history

Gqwill69: Created page with " #pwmconfig
# Configuration file generated by pwmconfig, changes will be lost INTERVAL=10 DEVPATH=hwmon1=devices/platform/it87.3712 DEVNAME=hwmon1=it8721 FCTEMPS=hwmon1/de..."