Orangepi: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
OrangePi 3B info<br> | OrangePi 3B info<br> | ||
Install the following image for bookworm/debian | Install the following image for bookworm/debian to SD/TF card | ||
Orangepi3b_1.0.8_debian_bookworm_server_linux5.10.160.img | Orangepi3b_1.0.8_debian_bookworm_server_linux5.10.160.img | ||
Then run the following commands to fix Ethernet port not working | Then run the following commands to fix Ethernet port not working | ||
| Line 21: | Line 21: | ||
</pre> | </pre> | ||
chmod +x /etc/rc.local | chmod +x /etc/rc.local | ||
* Install to eMMC | |||
scp Orangepi3b_1.0.8_debian_bookworm_server_linux5.10.160.img orangepi@orangepi3b:~/ | |||
* Find eMMC drive | |||
ls /dev/mmcblk*boot0 | cut -c1-12 | |||
* Clear eMMC | |||
sudo dd bs=1M if=/dev/zero of=/dev/mmcblk0 count=1000 status=progress | |||
sudo sync | |||
* Copy img to eMMC | |||
dd bs=1M if=Orangepi3b_1.0.8_debian_bookworm_server_linux5.10.160.img of=/dev/mmcblk0 status=progress | |||
sudo sync | |||
After successfully burning the Linux image of the development board to the eMMC,<br> | |||
you can use the poweroff command to shut down. Then please pull out the TF card, and<br> | |||
then short press the power button to turn on, and then the Linux system in the eMMC will<br> | |||
be started.<br> | |||
[[Category Linux]] | [[Category Linux]] | ||
Revision as of 17:55, 23 November 2025
OrangePi 3B info
Install the following image for bookworm/debian to SD/TF card
Orangepi3b_1.0.8_debian_bookworm_server_linux5.10.160.img
Then run the following commands to fix Ethernet port not working
io -4 0xFDC60284 0x3f3f3f3f io -4 0xFDC6028C 0x003f003f io -4 0xFDC60298 0x3f003f00 io -4 0xFDC6029C 0x3f3f3f3f io -4 0xfdc60388 0xFFFF0049
- Make permanent
Add the following before "exit 0" on /etc/rc.local
# ETHERNET FIX io -4 0xFDC60284 0x3f3f3f3f io -4 0xFDC6028C 0x003f003f io -4 0xFDC60298 0x3f003f00 io -4 0xFDC6029C 0x3f3f3f3f io -4 0xfdc60388 0xFFFF0049
chmod +x /etc/rc.local
- Install to eMMC
scp Orangepi3b_1.0.8_debian_bookworm_server_linux5.10.160.img orangepi@orangepi3b:~/
- Find eMMC drive
ls /dev/mmcblk*boot0 | cut -c1-12
- Clear eMMC
sudo dd bs=1M if=/dev/zero of=/dev/mmcblk0 count=1000 status=progress sudo sync
- Copy img to eMMC
dd bs=1M if=Orangepi3b_1.0.8_debian_bookworm_server_linux5.10.160.img of=/dev/mmcblk0 status=progress sudo sync
After successfully burning the Linux image of the development board to the eMMC,
you can use the poweroff command to shut down. Then please pull out the TF card, and
then short press the power button to turn on, and then the Linux system in the eMMC will
be started.
Category Linux